Operation Manual

FRITZ! in Brief
FRITZ! – 3 FRITZ! in Brief 13
3 FRITZ! in Brief
This chapter presents basic information about the FRITZ!
modules.
The first section describes the basic configuration settings of
the FRITZ! modules which should be made by all users. This is
followed by short instructions about the individual FRITZ! mod-
ules.
For more detailed information on configuration and operation
of the FRITZ! modules, see the comprehensive chapters in this
manual and in the Online Help.
3.1 General Settings
Individual settings can be configured for each FRITZ! module.
Specify your individual preferences using the “Settings” com-
mand available in each module.
The following settings should be configured before you start
working with FRITZ!.
If your ISDN line is a PBX extension, make sure FRITZ! is
configured accordingly.
Define the MSNs for which each individual FRITZ! mod-
ule accepts incoming calls.
Select telephone service providers (call-by-call providers)
to reduce your telephone charges.
Make the settings for operation at a PBX and the selections for
call-by-call providers in one FRITZ! module; they will be ap-
plied to the other FRITZ! modules automatically.
See the following sections for instructions about how to make
the general settings.