Operation Manual

The Next Steps
FRITZ! – 2 Installing FRITZ! 11
2.4 The Next Steps
Before FRITZ! can go online, the applications interface CAPI
2.0 for your ISDN-Controller must be loaded. See your ISDN-
Controller manual for details.
If you performed an installation with configuration, you can
start working with FRITZ! immediately by opening the pro-
grams from the Start menu. If you performed a simple instal-
lation, open a FRITZ! module and check the settings for oper-
ation at a PBX first before you begin working.
If you want to operate FRITZ!fax and FRITZ!fon at the same
time, each module must be assigned a unique multiple sub-
scriber number (MSN).
FRITZ!fax and FRITZ!fon both respond to the service indicator
“Audio”. If both of these modules used one ISDN number, in-
coming fax calls would be answered by FRITZ!fon. Calls can be
directed to the correct application only by assigning distinct
MSNs!
Start each program and open its “Settings” dialog. Click the
“ISDN” tab and then enter a different one of your ISDN line’s
MSNs for each module. For more information, see the sec-
tions on the individual modules in this manual and in the
Online Help.
For the latest information about FRITZ! which was not yet
available at the time of printing, see the FRITZ! README file
in the FRITZ! program group.