Operation Manual

FRITZ!Powerline Adapter: Status Display

The FRITZ!Powerline adapter LEDs indicate the following:

Security and Handling

 Operate the FRITZ!Powerline adapters in a dry place that is free of dust and protected

from direct sunlight and provide for suﬃ cient ventilation.

 The FRITZ!Powerline adapters are intended for indoor use only. Never let liquids get

inside the FRITZ!Powerline adapters.

 No FRITZ!Powerline adapters can be plugged together.

 Do not open the housings of the FRITZ!Powerline adapters. The devices contain hazard-

ous components and should only be opened by authorized repair technicians.

 To clean the FRITZ!Powerline, disconnect it from the electrical mains and wipe it with a

damp cloth.

CE Declaration

FRITZ!Powerline 530E satisﬁ es the essential requirements of the improved EMC Directive

2004/108/EC (Electromagnetic Compatibility), the Low Voltage Directive (LVD) 2006/95/EC

(Electrical Equipment Designed for Use within Certain Voltage Limits), as well as the EU Directive

2009/125/EC (Ecodesign Requirements for Energy-related Products) and the 2011/65/EU

(RoHS Directive: on the restriction of the use of certain hazardous substances in electrical and

electronic equipment). The CE symbol conﬁ rms that FRITZ!Powerline 530E conforms with the

above mentioned regulations. The comprehensive declaration of CE conformity is included in the

manual (PDF) in the Internet under: avm.de/en/service/manuals.

on FRITZ!Powerline has electrical power

ﬂ ashes FRITZ!Powerline is restarting or conﬁ guring

security settings

ﬂ ashing

(every 15seconds)

FRITZ!Powerline is on standby

oﬀ FRITZ!Powerline has no electrical power

on The LAN port is in use

oﬀ No LAN cable is connected or the device on the

LAN cable is switched oﬀ

on FRITZ!Powerline is connected with the powerline

network and sending or receiving data

oﬀ FRITZ!Powerline did not detect any compatible

powerline devices or did not detect any devices

that use the same network key

1514

English