Operation Manual

LEDs, Buttons and Network Port
7
2.3 LEDs, Buttons and Network Port
LEDs
FRITZ!Powerline 500E has three LEDs that display the operat-
ing status:
LED Condition Meaning
on FRITZ!Powerline has electrical power
flashing FRITZ!Powerline is restarting or confi-
guring security settings
flashing (every
15 seconds)
FRITZ!Powerline is on standby
off FRITZ!Powerline has no electrical
power
on The network port (LAN port) is occup-
ied
off No network cable is connected, or
the device connected to the network
cable is switched off
on FRITZ!Powerline is connected with
the powerline network and sending
or receiving data
off FRITZ!Powerline did not detect any
compatible powerline devices or did
not detect any devices that use the
same network key
If you do not want to use the LEDs, you can switch them off in
the AVM FRITZ!Powerline program or in the user interface of a
connected FRITZ!Box.
FRITZ!Powerline 500E-e.fm Seite 7 Dienstag, 28. August 2012 6:41 18