Operation Manual

FRITZ!Fon MT-D 40

Configuring the Baby Monitor

FRITZ!Fon C4 40

8 Configuring the Baby Monitor

If your FRITZ!Fon is registered with a FRITZ!Box, you can configure the

FRITZ!Fon as a baby monitor.

FRITZ!Fon will then call a specified telephone number whenever the

ambient noise reaches a defined level.

1. Press the menu key .

2. Select “Supplementary services / OK / Baby monitor / OK /

Destination no. / OK”.

3. Enter a telephone number and press “OK”.

Delete all of the numerals already entered. Press the display

key “Options” and select “Telephone book / OK”. Select a tele-

phone book entry and press “OK”.

Delete all of the numerals already entered. Press the display

key “Options” and select “Internal call / OK”. Select a tele-

phone and then press “OK”.

4. Select “Activation / OK”.

5. Press “Options”, select a sensitivity level, and press “OK”. The

higher the sensitivity, the less the ambient noise needed to

trigger a call.

FRITZ!Fon is configured. “Baby monitor enabled” is shown on the dis-

play. Now you can place the FRITZ!Fon near the sleeping child.

To switch off the baby monitor, press the hang up key .