manual

LEDs
Registering with FRITZ!Box
1. Insert the FRITZ!DECT 200 in an outlet
near your FRITZ!Box.
The “DECT” LED fl ashes regularly.
2. Within 2minutes, press the “DECT”
button on your FRITZ!Box.
Hold the button down until the “Info”
or “DECT” LED on the FRITZ!Box begins
fl ashing.
FRITZ!DECT 200 is registered with the base
station. The wireless connection has been
established when the “DECT” LED lights up.
If “DECT” continues to fl ash, regis-
tration was not successful. Remove
FRITZ!DECT 200 from the power
outlet and repeat the registration
process.
LED Condition Meaning
On/Off
off > socket is switched off
on > socket is switched on
fl ashing > Transmitting fi rmware update to FRITZ!DECT 200. (Depend-
ing on the progress of the fi rmware update, the LED is off or
fl ashing.)
fl ashes
briefl y at regu-
lar intervals
> FRITZ!DECT 200 switched off the integrated socket because
the permitted amperage was exceeded. For more informa-
tion, see also page 13.
DECT on > FRITZ!DECT 200 is registered with the FRITZ!Box.
fl ashing > Registering with FRITZ!Box.
fl ashes
briefl y at regu-
lar intervals
> FRITZ!DECT 200 is not connected to the FRITZ!Box.
FRITZ!DECT is either not registered, or it is outside the
FRITZ!Box range.
Festnetz
Festnetz
Internet
In
t
e
rn
et
WLAN
W
LA
N
INFO
IN
FO
Power/DSL
Power
/DSL
Festnetz
Fest
netz
Internet
Internet
Powe
Power/
DSL
DSL
INFO
INFO
WLAN
WLAN
WLAN
WLAN
DECT
DECT
W
WLAN
N
W
W
W
WL
LAN
W
D
DECT
DE
ECT
D
DECT
DE
ECT
10 seconds
6 7