Operation Manual

AVM NDIS WAN CAPI Driver
26 FRITZ!Card – 3 FRITZ!: Internet and ISDN Software
For detailed information about setting up and using the AVM
ISDN CAPI Port Driver, see the CAPI Port Help. Once the pro-
gram has been installed, the Help file appears as a link on
your desktop.
AVM NDIS WAN CAPI Driver
The AVM NDIS WAN CAPI Driver for Windows allows use of
RAS (Remote Access Service) and dialing into Internet Ser-
vice Providers over ISDN.
NDIS (Network Device Interface Specification) is a standard
for connecting network adapters (hardware) to network pro-
tocols (software). NDIS WAN is a Microsoft extension of this
standard for wide-area networking (WAN). The AVM NDIS
WAN CAPI Driver thus allows the ISDN-Controller to be used
as a network adapter addressed over the CAPI 2.0 applica-
tions interface.
AVM ISDN TAPI Services for CAPI
AVM ISDN TAPI Services for CAPI are drivers which can be
used to implement TAPI applications with AVM ISDN-Control-
lers universally in Windows.
TAPI (Telephony Application Programming Interface) is a te-
lephony interface by Microsoft that allows telephony appli-
cations to be controlled from Windows. Using AVM ISDN TAPI
Services for CAPI, phone calls can be made or voice-mail sys-
tems controlled on the computer. For instance, Windows's
“Phone Dialer” can be used to establish connections to ana-
log or ISDN phones. The conversation then takes place using
a sound card and a headset or speakers and a microphone.
With the appropriate TAPI applications, a variety of other fea-
tures are available, including direct dialing of contacts listed
in Microsoft Outlook 2000 or 98.
TAPI applications based on the Microsoft standard TAPI 2.1
or higher can be used in combination with AVM ISDN-Con-
trollers and the AVM ISDN TAPI Services for CAPI.
For detailed information about functionality, configuration
and operation of the AVM ISDN system drivers, see the Help
files for the system drivers on the FRITZ!Card CD.
FCusb-e.book Seite 26 Dienstag, 12. September 2006 3:12 15