Operation Manual

Installing the Communications Software
14 FRITZ!Card – 2 Installing FRITZ!Card USB v2.1
Next, the welcome window of the installation program for
the AVM ISDN-Controller FRITZ!Card USB v2.1 appears
automatically.
5. Specify the folder in which the driver software is to be
installed on your computer.
6. As a final step of the driver software installation, a mes-
sage box is displayed showing the configuration of the
ISDN-Controller FRITZ!Card USB v2.1.
Once the driver software installation has been completed, a
message reports that the FRITZ! communications software
can be installed. For more information, read “Installing the
Communications Software” on page 14.
Windows 98 includes an “ISDN Configuration Wizard”. This
Wizard can be used neither to install ISDN hardware and
software correctly, nor to set up an ISDN connection. It can
only be used to configure a previously installed NDIS WAN
CAPI driver (one of the AVM system drivers).
2.7 Installing the Communications
Software
After driver software for the FRITZ!Card USB v2.1 ISDN-Con-
troller has been installed, the setup program reports that the
FRITZ! communications software can be installed. Click the
“Install” button to proceed.
1. Specify the folder in which the FRITZ! communications
software is to be installed on your computer.
2. Next, specify the program group for FRITZ! in the Start
menu.
3. The next dialog asks whether you would like to perform
a simple installation or an installation with configura-
tion.
Installation: The FRITZ! modules are installed with de-
fault settings in the specified folder. All default settings
can be changed in the individual FRITZ! modules after
installation. Please read the relevant sections in the
FRITZ! manual or see the Online Help for instructions.
FCusb-e.book Seite 14 Dienstag, 12. September 2006 3:12 15