Operation Manual

Installing the Driver Software in Windows Me
14 FRITZ!Card PCI – 2 Installation
List of drivers found
5. When the message “Windows has finished installing
the software selected that your new hardware device re-
quires.” appears, click “Finish”.
Next, the welcome window of the installation program
for the AVM ISDN-Controller FRITZ!Card PCI appears
automatically.
6. Specify the folder in which the driver software is to be
installed on your computer.
7. As a final step of the driver software installation, a mes-
sage box is displayed showing the configuration of the
ISDN-Controller FRITZ!Card PCI.
Then a message that the FRITZ! communications software
can be installed appears. Continue with the section “Install-
ing the Communications Software FRITZ!” on page 17.
Windows Me includes an “ISDN Configuration Wizard”. This
Wizard can be used neither to install ISDN hardware and
software correctly, nor to set up an ISDN connection. It can
only be used to configure a previously installed AVM ISDN
NDIS WAN CAPI driver (one of the AVM system drivers).