Operation Manual

5 FRITZ! Installation
32
5 FRITZ! INSTALLATION
On the CD you will find two different versions of the com-
munications software. One version, , is a 16-bit version
for Windows 3.x. The other version, , is a 32-bit ver-
sion for Windows 95 and Windows NT. Both versions are based
on the CAPI 2.0 application interface.
The procedure for installing the two versions of is the
same. Proceed as follows to install or :
• Restart your computer. If you are using Windows 3.x, open
Windows.
• Insert the CD in your CD drive again.
The CD introduction starts automatically under Windows 95
and Windows NT.
In Windows 3.x, click on the file INTRO.HLP in the root
directory on the CD in order to open the CD introduction.
• On the first page, click on the icon.
• On the next page, select the operating system installed on
your computer by clicking on the corresponding icon.
• On the following page, click on the icon “FRITZ!32 Software
Package” or “FRITZ! Software Package”.
• To start the installation, click the button
on the following page.
• The initialization sequence of the installation program is
displayed. When initialization has been completed, the
welcome screen for the installation is displayed. Activate the
command. You can quit the installation procedure at
any time by means of the button.
• First specify the folder/directory in which is to be
installed. The default for Windows 95 and Windows NT is
C:\PROGRAM FILES\FRITZ!\. The default for Windows 3.x is
C:\FRITZ!. You can specify any path you wish. Confirm your
choice with .