Operation Manual

3 Installation der FRITZ!Card – Windows 3.x

• The message “Initializing Setup...” appears. After comple-

tion of initialization, the welcome screen for installation ap-

pears. Click on Next. You can quit the installation procedure

at any time by means of the Exit button.

• In the next window, specify the directory in which you wish

to install the FRITZ!Card software. The default is C:\IDRIVER.

You can also specify another directory. If the information you

have given is correct, click on Next.

• Now specify which D channel protocol is used on your ISDN

connection (1TR6 or DSS1 (EURO-ISDN)). Also specify here

whether you wish to activate or deactivate CAPI SoftCom-

pression V42bis. Click on the desired options. Click on the

Next button.

The installation program will now copy all files to the speci-

fied directory. The Windows system environment includes a

new program group called AVM. This group contains the

icons FRITZ!Card Readme and FRITZ!Card Setup. The driver

FBASE.386 is entered in the SYSTEM.INI file so that

FRITZ!Card is activated automatically when Windows is

started.

• If you changed the I/O address before installing the card or

if you wish to set another interrupt, start the FRITZ!Card

Setup program in the AVM program group and enter the new

values.

• To take FRITZ!Card into operation, restart Windows.

FRITZ!Card is loaded every time Windows is started. When

you exit Windows, FRITZ!Card is automatically deactivated.

The installation of FRITZ!Card for Windows 3.x is now com-

pleted.

For the latest information on FRITZ!Card, double-click on the

FRITZ!Card Readme icon in “AVM” program group.