Operation Manual

3 Installation der FRITZ!Card – Windows NT

• To take FRITZ!Card into operation, restart Windows.

FRITZ!Card is loaded every time Windows is started. When

you exit Windows, FRITZ!Card is automatically deactivated.

The installation of FRITZ!Card for Windows NT 4.0 (Worksta-

tion i386) is now completed.

3.2.1 Changing the Settings in the Software

If you wish to subsequently change the value for the I/O area

(I/O address) and the interrupt, you must reinstall the

FRITZ!Card driver software.

3.2.2Uninstalling FRITZ!Card in Windows NT

To uninstall FRITZ!Card in Windows NT, open the Control Panel

of Windows NT (Start/Settings) and double-click on the Add/

Remove Programs icon. “AVM ISDN-Controller FRITZ!Card” is

included in the list of installed software. Mark this entry and

then click on the Add/Remove button. The uninstall program is

started. Confirm your intention to uninstall the software by click-

ing Yes. Finally you are requested to restart the computer. This

concludes the uninstallation of the driver software for

FRITZ!Card.