Operation Manual

3 Installation der FRITZ!Card – Windows NT

• On the following page, click on the icon ISDN-Controller

FRITZ!Card and then on the following page, click on the Start

installation icon.

• After completion of initialization, the welcome screen for in-

stallation appears. Click on Next. You can quit the installa-

tion procedure at any time by means of the Exit button.

• In the next window, specify the folder in which you wish to

install the FRITZ!Card software. The default is C:\IDRIVER.

You may also specify a different folder. If the information

you have given is correct, click on Next.

• Now specify which D channel protocol is used on your ISDN

connection (1TR6 or DSS1 (EURO-ISDN)). Click on the desired

option. Click on the Next button.

• In the next window, you must specify the I/O area (I/O ad-

dress) under which the controller is to be managed in the

system. Specify the area which corresponds to the jumper

position on the controller.

• Then in the next window, specify the interrupt for the con-

troller.

• The installation program will now copy all files to the speci-

fied folder. In the last window of the installation procedure

you will see details about the I/O area and interrupt under

which FRITZ!Card is managed in the system and about the

D channel protocol used. Confirm these details with OK.

The Windows system environment includes a new program

folder called AVM. This contains the files FRITZ!Card

Readme, FRITZ!Card Setup, FRITZ!Card Test and AVM

Internet Home Page (link to the AVM pages on the Internet,

requirement: WWW browser and Internet access).

FRITZ!Card Readme contains up-to-date information on FRITZ!Card.

You can reselect the D channel protocol afterwards using the

FRITZ!Card Setup program and activate CAPI SoftCompression X75/

V42bis. The FRITZ!Card Test program checks the functional integrity

of FRITZ!Card.