Operation Manual

3 How to Install FRITZ!Card – Windows 95

3HOW TO INSTALL FRITZ!CARD

You have the facility to install FRITZ!Card in Windows 95, Win-

dows NT 4.0 (Workstation i386) or Windows 3.x. For further in-

formation, please refer to the relevant sections.

3.1 Installation in Windows 95

The FRITZ!Card CD contains an introduction which provides you

with information about the contents of the CD. You can start the

introduction by going into the Explorer and double-clicking on

the file INTRO.HLP in the root directory on the CD.

The installation of FRITZ!Card is performed in five main steps:

1. Installation of a new hardware component

2. Setting the I/O area (I/O address) on FRITZ!Card

3. Installation of FRITZ!Card in the PC

4. Connection of FRITZ!Card to the ISDN

5. Installation of the driver software for FRITZ!Card

With Windows 95 it is absolutely essential to observe the sequence

of the installation steps. If you fail to follow the specified sequence,

error-free operation of FRITZ!Card is not guaranteed.

1. Installing a New Hardware Component

• Insert the FRITZ!Card CD into your CD drive. Start the CD

introduction by going into the Explorer and double-clicking

on the file INTRO.HLP in the root directory on the CD.

• On the welcome page of the introduction, click on the icon

for FRITZ!Card and on the next page, click on the Windows

95 icon.

• On the following page, click on the icon ISDN-Controller

FRITZ!Card and then on the following page, click on the Start

installation icon. The Windows 95 Add New Hardware Wiz-