Operation Manual

2 All about FRITZ!Card

service indicator “voice”. This is why it is important to specify

which call is to be accepted with which MSN by which FRITZ!

module or by an ISDN telephone or a PBX. Please refer to the

FRITZ! manual or the FRITZ! online help for the detailed con-

figuration instructions.

Thus, if you wish to receive faxes as well as data with

FRITZ!Card, you do not need to assign different multiple sub-

scriber numbers to these two applications because FRITZ!fax

is responsible for calls with the “voice” indicator and FRITZ!data

for calls with the “data” indicator.

FRITZ!fax and the answering machine FRITZ!vox both use the

same service indicator (“voice”), however.

If you use FRITZ!fax at the same time as FRITZ!vox, you must allo-

cate different multiple subscriber numbers to the two modules in

order that incoming calls can be assigned without ambiguity.

2.5 Mind you Install FRITZ!Card Correctly!

You should observe the following installation sequence for the

individual FRITZ!Card components:

1. Installation of FRITZ!Card and the driver software (Chapter 3

“How to Install FRITZ!Card”).

2. Installation of the FRITZ! or FRITZ!32 communications

software (Chapter 5 “FRITZ! Installation“) including the CAPI

Port Driver.

3. Installation of the AVM system drivers (Chapter 4 “Onto the

Internet with FRITZ!Card”).

4. Installation of software for online services such as AOL,

videotext services etc.

You should:

You must:

You can: