Specifications

Waiting Calls
FRITZ!Box Fon WLAN 7270 95
Waiting Calls
When the “Call Waiting” feature is enabled and you are
conducting a call, you will be notified as soon as an exter-
nal call arrives on your your line. This call will be signaled
by an acoustic signal in the handset. You can accept the
connection with the new caller within 30 seconds. If you
ignore the signal, the waiting call is rejected after
30 seconds.
For instructions on how to turn the Call Waiting function
on and off, see the section “Call Waiting” on page 86.
Call Back on Busy (CCBS) on the ISDN Line
When you dial a number and it is busy, you can enable the
“Call Back on Busy” feature. As soon as the line is free,
your telephone rings for 20 seconds, as it would for an ex-
ternal call. When you pick up your handset, the number of
desired party will be dialed automatically.
“Call Back on Busy” can be used for both external and in-
ternal connections.
A maximum of five call-back requests can be enabled for
each extension at any given time.
Accepting or Rejecting Waiting Calls
R2 To accept a waiting call, dial the sequence
shown at left. Your original call is now on hold.
R1 To return to your original connection, dial the se-
quence shown at left.
You can also accept the waiting call by hanging
up your existing connection, i.e., by hanging up
the handset. In this case the phone rings as soon
as you have hung up. Pick up the handset again
to accept the waiting call.
R0 To reject a waiting call, dial the sequence shown
at left.
F!BoxFonWLAN-7270-e.book Seite 95 Donnerstag, 7. April 2011 5:36 17