Specifications

Enabling/Disabling WLAN
FRITZ!Box Fon WLAN 7270 77
Enabling/Disabling WLAN
The WLAN function can be switched on and off using the
telephone keypad. This is especially convenient when the
WLAN function has been switched off. Simply use your
telephone to turn it back on. This means that the WLAN
function can be enabled without having to use a wired
connection to open the user interface.
Do Not Disturb
You can enable a Do Not Disturb function for any tele-
phone connected to FRITZ!Box in the user interface. When
Do Not Disturb is enabled, the telephone will not ring. In
configuring this function you can choose between ena-
bling the function immediately and selecting a specific
time period.
Immediately When Do Not Disturb is enabled immediately, no incoming
calls will be signaled at the specified extension. The Do
Not Disturb setting will remain enabled until it is disabled.
Period Alternatively, you can enter a Do Not Disturb period during
which the telephone will not ring. At the extension for
which a Do Not Disturb period is to be configured, define
the period during which the phone should not ring and
save your entries. Then enable Do Not Disturb. Do Not Dis-
turb then automatically will be switched on daily at the
time entered in the “Start” field and switched off again at
the time defined in the “End” field.
Example: Do Not Disturb should be configured from
20:00 p.m. until 07:00 a.m. daily. Enter the value “2000”
for <Start> and “0700” for <End>.
Disabling the
Function
Both kinds of Do Not Disturb settings can be disabled by
means of a keypad sequence.
Enabling and Disabling WLAN
r96s1s enables the WLAN function
r96s0s disables the WLAN function
F!BoxFonWLAN-7270-e.book Seite 77 Donnerstag, 7. April 2011 5:36 17