Specifications

Tips for Using USB Devices
FRITZ!Box Fon WLAN 7270 67
FRITZ!WLAN USB
Stick
If you are using the FRITZ!WLAN USB Stick with your
FRITZ!Box, the WLAN standards IEEE 802.11 g+b are sup-
ported in the 2.4-GHz frequency band.
For more information, see the “More About WLAN” chapter
from page 142 and the manual for the FRITZ!WLAN USB
Stick.
AVM Stick & Surf With the AVM Stick & Surf technology it is easy to estab-
lish a secure WLAN connection. Stick & Surf is possible
with the FRITZ!WLAN USB Stick N and also with the
FRITZ!WLAN USB Stick.
1. Insert the your stick into the USB port on the
FRITZ!Box.
The WLAN security settings are transmitted automati-
cally to the FRITZ!WLAN USB Stick. The “INFO” LED on
the FRITZ!Box begins flashing rapidly.
As soon as the “INFO” LED stops flashing, transmis-
sion of the settings has been concluded.
2. Remove the FRITZ!WLAN USB Stick from the device.
3. After the security settings have been transmitted au-
tomatically, you can insert the FRITZ!WLAN USB Stick
in a computer.
Now the FRITZ!WLAN USB Stick is ready to establish a con-
nection to the FRITZ!Box. No further settings are neces-
sary.
8.9 Tips for Using USB Devices
When using USB devices at the USB port of the FRITZ!Box,
please keep in mind the following;
 If more than one USB device without its own power
supply is connected to the FRITZ!Box, please note
that, in accordance with the USB specification, the
total current consumption may not exceed a value of
500 mA. Otherwise unspecified malfunctions with
the USB devices or even damage to the FRITZ!Box
may occur.
F!BoxFonWLAN-7270-e.book Seite 67 Donnerstag, 7. April 2011 5:36 17