Specifications

Enabling the USB Remote Connection
FRITZ!Box Fon WLAN 7270 65
 USB scanner
Enabling the USB Remote Connection
Work through the following steps in order to enable the
USB remote connection on your computer:
1. Start a web browser on your computer.
2. Enter fritz.box
in the address line of the browser.
3. Enable the expert view of the FRITZ!Box in the “Sys-
tem / Expert Mode” menu. Confirm by clicking “Ap-
ply”.
4. Open the “USB Remote Connection” page in the
“Home Network / USB Devices” menu.
5. Now install the program for the USB remote connec-
tion on the computer from which you want to use the
USB devices. Follow the instructions on the “USB Re-
mote Connection” page.
The program can be implemented in Windows 7,
Windows Vista (32-bit) and Windows XP (32-bit) with
Service Pack 2 or higher.
6. Open the “USB Remote Connection” page in the
“Home Network / USB Devices” menu, select the set-
ting “Enable USB remote connection” and click “Ap-
ply”.
7. The next step is to specify for which kind of USB de-
vices the USB remote connection should be enabled.
Enable the desired options.
8. As a final step, click “Apply”. All USB devices con-
nected to the FRITZ!Box will be detected again.
Isochronal USB devices with time-critical transmission
(isochronous USB devices like sound cards, web cams,
video converters or TV adapters) are not supported. The
FTP and USB network memory functions are not available
as long as the USB remote connection is active for USB
storage devices.
F!BoxFonWLAN-7270-e.book Seite 65 Donnerstag, 7. April 2011 5:36 17