Specifications

FRITZ!Box Fon WLAN 7270 64
USB Hub
8.6 USB Hub
A USB hub can be connected to the USB host controller. A
USB hub is a device to extend existing USB ports.
You can connect two USB mass storage devices and one
USB printer, or three USB mass storage devices (like a
hard drive or memory stick) to the USB hub.
8.7 FRITZ!Box USB Remote Connection
With the FRITZ!Box USB remote connection you can control
connections between your computer and USB devices.
The computer and the USB devices are all connected with
the FRITZ!Box.
A USB device connected to the FRITZ!Box is handed over
to a computer via the USB remote connection function.
The USB device is detected as new hardware by the oper-
ating system on this computer, so that device software
can be installed as if it were connected directly to the
computer.
Enable the FRITZ!Box USB remote connection whenever
you would like to use one of the following devices on the
FRITZ!Box:
 USB storage device with the NTFS file format
 printer with the Graphics Device Interface (GDI print-
er) that requires the driver software for the given op-
erating system
 multi-function printer whose scanner, fax or card
reader features are to be used
 printer with ink level monitor (requiring bidirectional
communication)
AVM storngly advises to use a USB hub with its own pow-
er supply.
The USB remote connection can be utilized in Windows 7,
Windows Vista (32-bit) and Windows XP (32-bit) with Ser-
vice Pack 2 or higher.
F!BoxFonWLAN-7270-e.book Seite 64 Donnerstag, 7. April 2011 5:36 17