Specifications

Setting Up Password Protection
FRITZ!Box Fon WLAN 7270 33
Please note the following once you have enabled pass-
word protection:
 When the user interface is opened, the login screen
will be displayed first. Enter the password here to log
in to the user interface.
 If you do not click on the user interface for a period of
longer than ten minutes, you will be logged off the
user interface automatically.
The next time you click on the user interface you
must log back in.
 There are some pages in the user interface from
which the user is not logged off automatically. These
are pages that show constantly changing informa-
tion, which are refreshed automatically at regular in-
tervals. The “Overview” page is one example.
 You can log yourself off the user interface by clicking
the icon with the padlock at the top right.
 Be sure to use a password you can remember easily.
If you forget the password, the only way to access the
FRITZ!Box is to restore the factory settings. All set-
tings made during operation will be overwritten. Then
you can open the user interface again in order to re-
configure your settings or restore the settings you
saved during previous operation.
Setting Up Password Protection
There are several ways to set up password protection in
the FRITZ!Box:
 On the loin screen:
As long as password protection is not enabled and
you have not switched off the prompt to use pass-
word protection, you will be prompted to set up pass-
word protection every time you open the user inter-
face.
F!BoxFonWLAN-7270-e.book Seite 33 Donnerstag, 7. April 2011 5:36 17