Specifications

Using WLAN Adapters from Other Manufacturers
FRITZ!Box Fon WLAN 7270 23
WPA Not Supported If your WLAN adapter does not support WPA, you must
convert the encryption in the FRITZ!Box to WEP. For this
you must change the WLAN settings in the FRITZ!Box. To
do so, proceed as follows:
1. Connect the FRITZ!Box and the computer using the
network cable (yellow) (see the section “Connecting
Computers to the LAN Port” from page 18).
2. Start a web browser on your computer.
3. Enter fritz.box
in the address line of the browser.
4. Select the “WLAN / Security” menu.
5. Then select WEP encryption and enter a network key.
6. Click the “Apply” button.
A window is displayed with the WLAN security set-
tings.
7. Make a note of the settings or print out the page by
clicking the printer icon in the toolbar.
8. Close the user interface and clear the connection be-
tween the FRITZ!Box and the computer. Remove the
network cable (yellow).
9. Configure your WLAN adapter with the security set-
tings entered in the FRITZ!Box.
The WLAN connection between your WLAN adapter and
the FRITZ!Box will be established.
F!BoxFonWLAN-7270-e.book Seite 23 Donnerstag, 7. April 2011 5:36 17