Specifications

FRITZ!Box Fon WLAN 7270 22
Using WLAN Adapters from Other Manufacturers
2. Install the WLAN adapter in your computer along with
the appropriate software. Please take note of the in-
structions in the documentation of the adapter.
3. In order to establish a WLAN connection to the
FRITZ!Box, you must either use the WLAN software
supplied with the operating system, or the manufac-
turer’s WLAN software included in the WLAN adapter
package.
Establishing a
Connection
The FRITZ!Box is delivered with preset values for WLAN se-
curity. You must enter these values during the configura-
tion of the WLAN adapter.
If you would like to establish a WLAN connection using
these preset values, then your WLAN adapter must sup-
port the WPA encryption procedure.
1. Start the WLAN software.
2. Enter the following values for the connection be-
tween the FRITZ!Box and the WLAN adapter:
3. Confirm your entries using the relevant button in the
user interface (for instance, “OK” or “Connect”).
Now your WLAN adapter and the FRITZ!Box are connected
with each other wirelessly.
Please see the instructions in the section “Opening the
User Interface” on page 32. See also the information on
WLAN security in the section “Security” from page 139.
SSID (name of the
WLAN radio network)
FRITZ!Box Fon WLAN 7270
Encryption methods WPA (TKIP) or WPA2 (AESCCMP)
Encryption WPA-PSK or WPA2-PSK (AES)
Key The key is printed on the sticker on
the base of the device and on the
cover of the FRITZ!Box CD.
Network mode Infrastructure
F!BoxFonWLAN-7270-e.book Seite 22 Donnerstag, 7. April 2011 5:36 17