Specifications

Connecting to Electrical Power
FRITZ!Box Fon WLAN 7270 17
3.2 Connecting to Electrical Power
Connecting to the power supply
Connecting Set aside the power supply unit out of the FRITZ!Box pack-
age.
1. Connect the power supply unit to the socket on the
FRITZ!Box labeled “Power”.
2. Plug the other end into an AC power outlet.
The green “Power/DSL” LED will light up after a few sec-
onds.
3.3 Connecting to the Computer(s)
If you would like to surf the web using the FRITZ!Box or to
open the FRITZ!Box user interface, then you must connect
a computer with the FRITZ!Box.
A computer can be connected with the FRITZ!Box in two
different ways:
 via a LAN port
 wirelessly via WLAN
F!BoxFonWLAN-7270-e.book Seite 17 Donnerstag, 7. April 2011 5:36 17