Specifications

FRITZ!Box Fon WLAN 7270 154
Always Assigning the Same IP Address
Always Assigning the Same IP Address
In the properties of the network devices, the setting “Al-
ways assign this network device the same IP address” is
displayed.
When this setting is enabled for a network device, the
DHCP server of the FRITZ!Box will always assign the same
IP address to this device each time the connection is es-
tablished.
Start Computer: Wake on LAN
In the properties of the network devices that are connect-
ed with the FRITZ!Box via a network (LAN) port, the “Start
Computer” button is displayed. Use this button to start
computers that support Wake on LAN.
With the Wake on LAN function you can start computers in
your FRITZ!Box via the Internet. For instance, you can ac-
cess a computer at any time using remote maintenance
software, without wasting electricity by keeping the com-
puter switched on permanently.
3.2 IP Settings
The IP settings of the FRITZ!Box are preset upon delivery
with the following values:
The IP address and the corresponding subnet mask yield
the following values:
Factory Settings
All computers are located in the
same IP network
enabled
IP address 192.168.178.1
Subnet mask 255.255.255.0
DHCP server enabled
Network address of the subnet 192.168.178.0
Entire IP address range for the
computers
192.168.178.2 -
192.168.178.253
F!BoxFonWLAN-7270-e.book Seite 154 Donnerstag, 7. April 2011 5:36 17