Specifications

WPS (Wi-Fi Protected Setup)
FRITZ!Box Fon WLAN 7270 149
9. In the “Security” area define how the repeater con-
nection should be encrypted.
10. Enter a WLAN key.
11. Click “Apply”.
The “Repeater Settings” of the FRITZ!Box are dis-
played.
12. We recommend printing out these settings.
This concludes the configuration of the FRITZ!Box as a re-
peater.
2.6 WPS (Wi-Fi Protected Setup)
The FRITZ!Box supports WPS (Wi-Fi Protected Setup). With
WPS you can create secure links between WLAN adapters
and your FRITZ!Box. All of the necessary WLAN security
settings are transferred in the process. You can use either
the push-button or the PIN method.
WPS with the Push Button Method
The push-button method (WPS PBC) can be used if your
WLAN adapter is also equipped with a WPS button, or if
WPS can be enabled via the control software of the WLAN
adapter.
1. Press the “WLAN” button on the FRITZ!Box and hold it
down for at least six seconds.
Please note that the WPA2 encryption method is only
available for AVM devices.
Register the FRITZ!Box settings you printed out in the
base station operating in your wireless network.
WPS can be used only in combination with WLAN adapt-
ers that also support WPS. Consult the documentation of
your WLAN adapter to find out whether it supports WPS.
F!BoxFonWLAN-7270-e.book Seite 149 Donnerstag, 7. April 2011 5:36 17