Specifications

Three-Party Conference Call
FRITZ!Box Fon WLAN 7170 – 11 Configuration and Operation by Telephone 111
Three-Party Conference Call
FRITZ!Box Fon WLAN allows you to hold telephone conferenc-
es with two other people at once. Two external and one inter-
nal party, or two internal and one external party can conduct
a conference call with each other.
You can set up a three-party conference as follows:
N Pick up the handset.
M Dial the external number of the first party. Talk.
R Press the Hold button.
M To establish a connection to Caller 2, simply dial
either the desired extension number or the out-
side line access “0” followed by the desired ex-
ternal number. You can now talk to the second
subscriber while your first call is on hold.
R3 Dial the sequence shown at left to begin a three-
party conference call.
D Now all three participants can confer together. If
either of the other two parties hangs up, your
connection with the remaining participant re-
mains active.
O You can end the three-party call by hanging up
the handset.
R2 You can also switch from the three-party call back
to the original two-party connection. Dial the se-
quence shown at left. This ends the three-party
conference. The connection that was active last
before you initiated the three-party conference is
now active again. The other call is on hold. You
can alternate between the two connections by di-
aling the same sequence again.