Specifications

FRITZ!Box 77

Disabling the DHCP Server

You can switch off the DHCP server.

To make sure that all computers remain in the same subnet

as the FRITZ!Box even when the DHCP server is disabled,

you must enter the IP addresses manually in the comput-

ers’ network settings. First disable the option “Obtain an IP

address automatically” and then enter the IP address man-

ually in the appropriate field.

In the case of the preset IP address of the FRITZ!Box, the fol-

lowing IP addresses are available for assignment to the

computers:

Each IP address can be assigned only once.

Changing the DHCP Server Settings

Proceed as follows to open the DHCP server settings:

1. Open the FRITZ!Box user interface (see the section

“Opening the User Interface” from page 30).

2. Click “Expert Mode” in the “System” menu, enable the

setting “Show expert settings” and confirm this set-

ting by clicking “Apply”.

3. Open the “System / Network Settings” menu.

4. Click the “IP Addresses” button.

The “IP Settings” page is opened. Here you can make

the settings for the DHCP server.

192.168.178.2 - 192.168.178.253

F!BoxFonWLAN-7170v2-e.book Seite 77 Freitag, 23. November 2007 3:41 15