Operation Manual

Call Waiting
FRITZ!Box Fon WLAN – 8 Configuration and Operation by Telephone 95
Call Waiting
Enable the “Call Waiting” feature to be notified during a call
if a second caller is dialing your line. An acoustic signal in
your telephone handset notifies you that a second call is
waiting. You can accept the connection with the new caller
within 30 seconds. If you ignore the signal, the waiting call is
rejected after 30 seconds.
R2
To accept a waiting call, dial the sequence shown at
left. Your original call is now on hold.
R1
To return to your original connection, dial the se-
quence shown at left.
You can also accept to the waiting call by hanging up
your existing connection, i.e., by hanging up the hand-
set. In this case the phone rings as soon as you have
hung up. Pick up the handset again to accept the wait-
ing call.
R0
To reject a waiting call, dial the sequence shown at
left.