Operation Manual

Connected Line Identification Restriction and Presentation (COLR / COLP)

92 FRITZ!Box Fon WLAN – 8 Configuration and Operation by Telephone

Disabling CLIP

Connected Line Identification Restriction and

Presentation (COLR / COLP)

By default, a caller’s display always shows the Multiple Sub-

scriber Number (MSN) of the extension she or he dialed. If

you accept the call at another extension, the MSN of this ex-

tension will be displayed, as long as the caller is using an

ISDN phone with the COLP feature enabled. If you do not

want the caller to know that the call has been picked up at

another extension and thus do not wish this number to be

displayed, you have the option of suppressing transmission

of the connected line. The caller’s display will continue to

show the number she or he called.

Transmission of the connected line’s number can be

switched on and off for each extension individually. Trans-

mission of the connected line’s number is permanently en-

abled in the PBX factory settings.

Pick up the handset.

r50 Ext. s0s Dial the sequence shown at left.

Type in the number of the extension

in the “Ext.” field.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.