Operation Manual

Displaying the Incoming Caller ID (CLIP)
FRITZ!Box Fon WLAN – 8 Configuration and Operation by Telephone 91
Enabling CLIR Permanently
Disabling CLIR Permanently
Displaying the Incoming Caller ID (CLIP)
The CLIP (Calling Line Identification Presentation) function
makes the number of callers – external and internal – visible
on your telephone display.
This feature is only effective if your telephone supports CLIP.
The CLIP function is enabled in the factory settings. This
function can be permanently disabled and enabled again.
Enabling CLIP
N
Pick up the handset.
r51 Ext. s1s Dial the sequence shown at left.
Type in the number of the extension
in the “Ext.” field.
r91ss
Save your settings if desired by dial-
ing the sequence shown at left.
O
Hang up the handset.
N
Pick up the handset.
r51 Ext. s0s Dial the sequence shown at left.
Type in the number of the extension
in the “Ext.” field.
r91ss
Save your settings if desired by dial-
ing the sequence shown at left.
O
Hang up the handset.
N
Pick up the handset.
r50 Ext. s1s Dial the sequence shown at left.
Type in the number of the extension
in the “Ext.” field.
r91ss
Save your settings if desired by dial-
ing the sequence shown at left.
O
Hang up the handset.