Operation Manual

Features of the Telephone Network

FRITZ!Box Fon WLAN – 8 Configuration and Operation by Telephone 85

8.4 Features of the Telephone Network

This section describes how you can use the telephone net-

work features via your telephone keypad.

Additional features can be selected and applied in the

FRITZ!Box Fon WLAN window, which can be used whenever

FRITZ!Box Fon WLAN is connected to a computer.

The telephone network features can be used only if they are

supported by your telephone network carrier and enabled on

your telephone line.

Using FRITZ!Box Fon WLAN Features on the

Analog Line

When FRITZ!Box Fon WLAN is connected to an analog line, a

feature can be activated directly at the switching station only

if the line is set for this kind of configuration.

Call Forwarding (Call Diversion via the Central

Exchange)

Call forwarding is performed by the ISDN operator’s switch-

ing station. To use call forwarding, FRITZ!Box Fon WLAN must

be connected to an ISDN line. Then this feature can be used

to forward calls to an external line. Call forwarding is subject

to charges by the network provider and cannot be used for

forwarding calls to an Internet number.

In addition to call forwarding, there is also call diversion via

FRITZ!Box Fon WLAN. Use this kind of call diversion to divert

calls to internal and external lines. See the section “Call Di-

version over FRITZ!Box Fon WLAN” from page 81 for more in-

formation.

Pick up the handset.

Dial the sequence shown at left.

Next enter the keyboard shortcut your net-

work provider has defined for the desired

feature. The given keyboard shortcut must

be obtained from your network provider.