Operation Manual

Three-Party Conference Call
84 FRITZ!Box Fon WLAN – 8 Configuration and Operation by Telephone
Three-Party Conference Call
FRITZ!Box Fon WLAN allows you to hold telephone conferenc-
es with two other people at once. Two external and one inter-
nal party, or two internal and one external party can conduct
a conference call with each other.
You can set up a three-party conference as follows:
N
Pick up the handset.
M
Dial the external number of the first party. Talk.
R
Press the Hold button.
M
To dial a second call, simply dial either the de-
sired extension number or the outside line access
“0” followed by the desired external number. You
can now talk to the second subscriber while your
first call is on hold.
R3
Dial the sequence shown at left to begin a three-
party conference call.
D
Now all three participants can confer together. If
either of the other two parties hangs up, your
connection with the remaining participant re-
mains active.
O
You can end the three-party call by hanging up
the handset.
R2
You can also switch from the three-party call back
to the original two-party connection. Dial the se-
quence shown at left. This ends the three-party
conference. The connection that was active last
before your initiated the three party conference is
now active again. The other call is on hold. You
can alternate between the two connections by
dialing the same sequence again.