Operation Manual

Specifying the Outside Dialing Mode
78 FRITZ!Box Fon WLAN – 8 Configuration and Operation by Telephone
Specifying the Outside Dialing Mode
Automatic outside dialing can be enabled or disabled for
each extension. When automatic outside dialing is set, the
dial tone sounds as soon as you lift the handset. If the exten-
sion is set to internal dialing, the dial tone will not sound un-
til after you dial “0”.
Enable Automatic Outside Dialing
Disabling Automatic Outside Dialing
Call Waiting Option
Call waiting can be switched on or off for each extension.
Some older terminal equipment connected to extensions
may misinterpret the call waiting signal. This is especially
true of fax machines and modems. If communication errors
occur, you should disable call waiting for fax and modem ex-
tensions.
When “Call Waiting” is enabled, modem and fax connections
may be interrupted.
N
Pick up the handset.
r1 Ext. s1s Dial the sequence shown at left.
r91ss
Save your settings if desired by dial-
ing the sequence shown at left.
O
Hang up the handset.
N
Pick up the handset.
r1 Ext. s0s Dial the sequence shown at left.
r91ss
Save your settings if desired by dial-
ing the sequence shown at left.
O
Hang up the handset.