Operation Manual

Connecting FRITZ!Box Fon WLAN with the WLAN Adapter of a Computer
FRITZ!Box Fon WLAN – 2 Starting FRITZ!Box Fon WLAN Operation 31
Entering the WLAN network key
The WLAN connection is set up.
If problems occur in setting up the WLAN connection,
check your WLAN settings as described in the section
“WLAN Connection Is Not Established” from page 64.
7. Please see the instructions in the section “Opening the
User Interface” on page 38.
Setting up a WLAN Connection Using the Manufacturer’s Us-
er Interface
Not all settings described below appear in every manufac-
turer’s user interface. Some settings are configured auto-
matically by certain manufacturers.
1. Select the SSID (WLAN radio network) “FRITZ!Box Fon
WLAN” in the user interface.
If the radio network is not displayed, please follow the
instructions in the section “The Radio Network Is Not
Displayed” from page 63.
2. Set “Infrastructure” as the network mode.
3. Select “128 bit” or “WEP 128 bit” encryption.
4. Set “Open Key” as the type of encryption or registration.
5. Enter the preset key in the “Key 1” field. Be sure to enter
the key in the desired format, ASCII or hexadecimal. The
key is printed on the sticker on the base of the device
and on the cover of the FRITZ!Box Fon WLAN CD. The key
is printed in both formats.