Operation Manual

Connecting FRITZ!Box Fon WLAN to DSL
18 FRITZ!Box Fon WLAN – 2 Starting FRITZ!Box Fon WLAN Operation
Connecting FRITZ!Box Fon WLAN to the power supply
5. The green “Power” LED will begin flashing after a few
seconds to indicate that FRITZ!Box Fon WLAN is ready
for operation.
2.3 Connecting FRITZ!Box Fon WLAN to
DSL
Perform the following steps to connect FRITZ!Box Fon WLAN
to DSL:
1. Pick up the gray cable.
2. Connect one end of the cable to the socket labeled
“DSL”, located at the far left of the back panel of
FRITZ!Box Fon WLAN.
3. Then connect the other end of the cable to the socket
on the DSL splitter labeled “DSL”. If the DSL line cable
does not fit in the splitter, insert the cable into the gray
RJ45-RJ11 adapter enclosed in the package and then
plug the adapter into the splitter socket.