Operation Manual

Suspend/Resume
100 FRITZ!Box Fon WLAN – 8 Configuration and Operation by Telephone
This command can be activated five times for each port.
To activate this feature, proceed as follows:
Callback requests can also be deleted manually, with the
oldest callback request being deleted first.
Suspend/Resume
The “Suspend/Resume” feature, also known technically as
“Terminal Portability”, allows you to suspend an existing
connection and resume it at another point on the S
0
bus. The
connection can be resumed at a different ISDN terminal de-
vice (such as an ISDN telephone) that is connected to your
BRI line along with FRITZ!Box Fon WLAN.
To suspend a call, proceed as follows:
M
You have just dialed a number and hear a ring tone.
5
If the call is not answered, within twenty seconds,
either dial the number “5”
or
Rs37r
the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset. As soon as the party you
dialed conducts a conversation from her or his
phone and this call is ended, your phone rings.
N Pick up the handset. The number of the remote par-
ty is dialed automatically.
N
Pick up the handset.
r37r
Dial the sequence shown at left.
O
Hang up the handset.
P
You are talking to Caller No. 1.
R
Press the Hold button. Call No 1 is now suspend-
ed.
s1PCs
Dial the sequence shown at left. Type in the
parked-call ID as “PC”. The parked-call ID can be
any number between 0 and 99. You will need to
enter this ID again when you resume the call.