Specifications

Configuring FRITZ!Box Fon WLAN 7050 by Phone
86 FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone
10.2 Configuring FRITZ!Box Fon WLAN 7050 by
Phone
Saving New Settings
In this section, saving refers to all current settings. It is not
necessary to save the configuration after each setting is made.
You may first configure all of your FRITZ!Box Fon WLAN’s set-
tings as desired, and then save them permanently.
Saving Permanently
Permanent saving cannot be reversed. However, you can re-
set the PBX to its factory settings or program it with different
settings.
Specifying the Outside Dialing Mode
Automatic outside dialing can be enabled or disabled for
each extension. When automatic outside dialing is set, the
dial tone sounds as soon as you lift the handset. If the exten-
sion is set to internal dialing, the dial tone will not sound un-
til after you dial “0”.
Enabling Automatic Outside Dialing
N
Pick up the handset.
r91ss
Save all settings made to your
FRITZ!Box Fon WLAN permanently by
dialing the sequence shown at left.
O
Hang up the handset.
N
Pick up the handset.
r1Ext.s1s Dial the sequence shown at left.
r91ss
Save your settings if desired by dial-
ing the sequence shown at left.
O
Hang up the handset.