Specifications

Configuring Analog Terminal Devices at FRITZ!Box Fon WLAN
44 FRITZ!Box Fon WLAN 7050 – 4 Making Calls with FRITZ!Box Fon WLAN 7050
4.3 Configuring Analog Terminal Devices at
FRITZ!Box Fon WLAN
FRITZ!Box Fon WLAN is configured so that you can make calls
to the analog network immediately after connecting analog
terminal devices, without any additional settings required.
The following settings are preconfigured at the analog lines
“FON 1”, “FON 2” and “FON 3”:
z calls can be accepted on all three lines: connected ter-
minal devices will ring at the same time
z outgoing calls can be conducted on all three lines
If the connected terminal devices are to react only to certain
numbers, numbers must be assigned to the extensions. The
number defined as “Number of the extension” also defines
whether calls from this extension will be conducted using
the fixed-line network or the Internet.
To do this, perform the following steps:
1. Start a web browser.
2. Enter “fritz.box” in the Address field.
3. Click the “Extensions” command in the “Telephony”
menu.
4. In the “Analog Extensions” area, click the “Change
Settings” button next to the number of the extension.
5. Select a number from the “Number of the extension”
drop-down menu in the “Extension FON 1” area.
The terminal device connected to the “FON 1” extension
reacts to incoming calls placed to this number and uses
the kind of connection specified for outgoing connec-
tions with this number.
6. If you would like to assign additional numbers to the ex-
tension, select from the “Additional numbers” drop-
down menus any other numbers the terminal device at
the “FON 1” line should react to for incoming calls.