Specifications

Opening the User Interface
FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation 37
In SUSE Linux 9.0, only one Ethernet adapter at a time can be
set to DHCP. If you have an additional network adapter, as-
sign it a fixed IP address. Otherwise problems may arise
with name resolution (cf. /etc/resolv.conf).
For a comprehensive of the basics on network configuration
in Linux, see, e.g.:
http://www.linux.org/docs/ldp/NET3-4-HOWTO-5.html
Please see the instructions in the next section.
2.12 Opening the User Interface
Once you have connected FRITZ!Box Fon WLAN with one or
more computers, or with a network hub or switch, you can
configure the settings for operation with FRITZ!Box Fon
WLAN.
The settings are configured on the FRITZ!Box Fon WLAN user
interface. This interface can be accessed from any of the
computers connected with FRITZ!Box Fon WLAN. The settings
are saved in FRITZ!Box Fon WLAN.
There are two ways to open the FRITZ!Box Fon WLAN user in-
terface:
z with the FRITZ!DSL Software
Install the FRITZ!DSL software included in the FRITZ!Box
Fon WLAN package on your computer, and open the
FRITZ!Box Fon WLAN user interface from the FRITZ!DSL
Start Center. For more information about FRITZ!DSL, see
the chapter “FRITZ!DSL: The Software Suite” from
page 53.
z with a web browser
Open your Internet browser on the computer and enter
“fritz.box”.