Specifications

FRITZ!Box Fon WLAN 7113 94
Changing the Network Settings
Factory Settings Upon delivery the interfaces of the FRITZ!Box are config-
ured as follows:
Thus the following address pools are available to the
DHCP server:
Computers connected with the FRITZ!Box via different in-
terfaces are located in different IP networks.
3.7 Changing the Network Settings
In order to change the network settings of the FRITZ!Box,
the Expert Mode must be enabled in the user interface:
1. Start a web browser on your computer and enter
fritz.box
in the address line of the browser.
2. Select the “Advanced Settings / System” menu in the
“Settings” area.
3. Click “Expert Mode” in the System menu, enable the
setting “Show expert settings” and confirm this
setting by clicking “Apply”.
Interface IP Address Subnet mask DHCP server
LAN 192.168.178.1 255.255.255.0 enabled
WLAN 192.168.182.1 255.255.255.0 enabled
Interface Address pool of the DHCP server at the
interface
LAN 192.168.178.20 - 192.168.178.200
WLAN 192.168.182.20 - 192.168.182.200
Interface network address of the IP network
LAN 192.168.178.0
WLAN 192.168.182.0