Specifications

FRITZ!Box Fon WLAN 7113 72
LEDs
1.2 LEDs
Five LEDs are built into the top of the FRITZ!Box Fon
WLAN 7113, which flash or light up to display various con-
nection statuses.
1.3 WLAN Button
The FRITZ!Box is equipped with a WLAN switch on its rear
panel.
The WLAN button can be used to enable and disable
WLAN.
LED Status Meaning
Power/DSL lights up
 FRITZ!Box on standby
 the device has electrical power and the DSL line is
ready for operation
flashes  the device has electrical power
 the connection to DSL is being established or has
been interrupted
Internet lights up a telephone connection to the Internet is active
flashes there are messages in your mailbox (this function must
be supported by your telephony carrier)
Fixed Line lights up a telephone connection via the telephone line is active
flashes there are messages in your mailbox (this function must
be supported by your telephony carrier)
WLAN lights up the WLAN function is enabled
flashes the WLAN function is being enabled or disabled
INFO lights up
 a telephone connection between two Internet
telephony subscribers is active; the call is free of
charge (this function must be supported by your
Internet telephony provider)
 signals an event that can be configured freely by the
user
flashes  updating the firmware
 signals an event that can be configured freely by the
user