Specifications

FRITZ!Box Fon WLAN 7113 40

Displaying the Incoming Caller ID (CLIP)

The CLIP (Calling Line Identification Presentation) function

makes the number of callers –external and internal– visi-

ble on your telephone display.

The CLIP function is enabled in the factory settings. This

function can be permanently disabled and enabled again.

Disabling Automatic Outside Dialing

The FRITZ!Box offers the possibility of disabling automatic

outside dialing. This means that you will receive an inter-

nal dialing tone when you lift the handset at the corre-

sponding extension. This makes sense at any extension

which is used to make many internal calls, for instance,

between the extensions of the FRITZ!Box. When automatic

outside dialing is disabled, for an external call the 0

must be dialed before the telephone number.

This feature is only effective if your telephone supports

CLIP.

Enabling Display of Incoming Caller ID (CLIP)

N Pick up the handset.

r50<Ext.>s1s Dial the sequence shown at left.

r91ss Save your settings if desired by dialing

the sequence shown at left.

O Hang up the handset.

Disabling Display of Incoming Caller ID (CLIP)

N Pick up the handset.

r50<Ext.>s0s Dial the sequence shown at left.

r91ss Save your settings if desired by dialing

the sequence shown at left.

O Hang up the handset.