Specifications

FRITZ!Box Fon WLAN 7113 14
Connecting to the Computer
Connecting Set aside the power supply unit out of the FRITZ!Box
package.
1. Connect the power supply unit to the socket on the
FRITZ!Box labeled “Power”.
2. Plug the other end into an AC power outlet.
The green “Power/DSL” LED will light up after a few sec-
onds to indicate that the device is ready for operation.
3.3 Connecting to the Computer
If you would like to surf the web using the FRITZ!Box or to
open the FRITZ!Box user interface, then you must connect
a computer with the FRITZ!Box.
A computer can be connected with the FRITZ!Box in two
different ways:
 via a LAN port
 wirelessly via WLAN
Properties Note the following when connecting computers to the
FRITZ!Box:
 One computer can be connected to the FRITZ!Box by
only one of these means.
 At the network port of the FRITZ!Box, a computer can
be connected directly or via a hub/switch.
 Using WLAN you can connect multiple computers wi-
th the FRITZ!Box at the same time.
 The way a computer is connected to the FRITZ!Box is
the same regardless of the operating system on the
computer.
 All of the computers connected with the FRITZ!Box
constitute a network.