Specifications

Network Settings in the FRITZ!Box

In the case of the preset IP address of the FRITZ!Box, the fol-

lowing IP addresses are available for assignment to the com-

puters:

Changing Network Settings

In order to change the network settings of the FRITZ!Box, the

Expert Mode must be enabled in the user interface:

1. Select the “System / Expert Mode” menu and enable

“Show expert settings”.

2. Select the “Home Network / Network” menu.

3. Select the “Network Settings” page.

4. Click the “IP Addresses” button.

The “IP Settings” page is opened.

5. Make the desired changes and then confirm with “OK”

so that all changes will be applied.

UPnP Settings

The Universal Plug-and-Play (UPnP) service included in your

FRITZ!Box provides status information about the FRITZ!Box to

all connected computers. Programs with UPnP support on

these computers can receive this information and use them

to display the status of the FRITZ!Box (e.g., connection status,

data transmission). UPnP service thus allows you to monitor

your FRITZ!Box from a connected computer.

192.168.178.2 - 192.168.178.254

Here too: each IP address can be assigned only once.

Please note that changes to the network settings in the

FRITZ!Box may make it necessary to adjust the network set-

tings of your computers so that you can continue to access

the FRITZ!Box user interface.

FRITZ!Box 3270-en.fm Seite 65 Mittwoch, 14. März 2012 2:44 14