Operation Manual

Installing the Driver Software in Windows XP
BlueFRITZ! USB – 2 Installing BlueFRITZ! USB 9
2.3 Installing the Driver Software in Windows XP
Administrator rights are required to install the driver soft-
ware in Windows XP.
Once the BlueFRITZ! USB is connected to your computer, the
“Found New Hardware Wizard” of Windows XP is started au-
tomatically.
1. Insert the installation CD and follow the instructions on
the screen.
2. After the sign-on window, select the option “Install the
software automatically (Recommended)”. Confirm with
“Next”.
3. In the next window, select the option “CD-ROM drives”
and confirm by clicking “Next”.
4. The program reports that a driver was found. Click
“Next” to install the driver.
5. A message appears: “Windows has finished installing
the software for this device”. Conclude the installation
by clicking “Finish”.
This completes the driver installation. For more information,
see the section “The Control Software BlueFRITZ!” on
page 13.
BlueFRITZ!USB-e.book Seite 9 Montag, 18. September 2006 3:36 15