Operation Manual

Installing BlueFRITZ! USB
8 BlueFRITZ! USB – 2 Installing BlueFRITZ! USB
2 Installing BlueFRITZ! USB
BlueFRITZ! USB can be installed in the operating systems Win-
dows XP, Windows Me, Windows 2000 and Windows 98 SE.
In some operating systems the display of menus and folders
can be changed. The following instructions are based on the
standard installation of each operating system.
2.1 Connecting BlueFRITZ! USB to the Computer
Perform the following steps to connect BlueFRITZ! USB to the
computer:
1. Switch your computer on and start the Windows operat-
ing system.
2. Insert BlueFRITZ! USB in your PC's USB port.
Your operating system’s Hardware Wizard detects BlueFRITZ!
USB automatically, so that you now can install the BlueFRITZ!
USB software. Follow the instructions in the sections below.
2.2 What Is Installed?
In the first installation the driver software for BlueFRITZ! USB
and the BlueFRITZ! control software are configured.
See the section for your operating system for installation in-
structions.
If you install a BlueFRITZ! ISDN Set with a preconfigured con-
nection, the connection between BlueFRITZ! USB and Blue-
FRITZ! AP-ISDN will be established automatically.
Once installation is complete you can install the FRITZ! com-
munications software, the AVM ISDN CAPI Port Driver and
other AVM system drivers or software for online services.
BlueFRITZ!USB-e.book Seite 8 Montag, 18. September 2006 3:36 15