Operation Manual

Requirements for BlueFRITZ! USB
BlueFRITZ! USB – 1 Welcome to BlueFRITZ! USB 7
1.2 Requirements for BlueFRITZ! USB
In order to operate BlueFRITZ! USB, you must have the fol-
lowing:
z A USB port on your computer.
z A computer with one of the following operating systems:
Microsoft Windows XP, Windows Me, Windows 2000 or
Windows 98.
If you already have an ISDN-Controller installed in your com-
puter, BlueFRITZ! USB will be installed without ISDN sup-
port. You can continue to use your familiar controller for IS-
DN communication.
You can install BlueFRITZ! USB if your computer meets all of
these requirements.
1.3 The BlueFRITZ! USB LEDs
The current operational state of BlueFRITZ! USB is indicated
by two LEDs (light-emitting diodes) on the front panel. The
LEDs indicate specific conditions as listed in the following ta-
ble:
LED Event type
USB indicates that BlueFRITZ! USB was recognized by the
operating system
Bluetooth indicates a Bluetooth connection with a Bluetooth de-
vice
BlueFRITZ!USB-e.book Seite 7 Montag, 18. September 2006 3:36 15