Operation Manual

Removing Software Components in Windows Me and 98 SE
BlueFRITZ! USB – 6 Removing the Software 49
If the FRITZ! communications software and the AVM ISDN
CAPI Port driver are installed on your system, then they
both appear in the list of “Currently installed programs:”
– FRITZ!
– AVM ISDN CAPI Port
– BlueFRITZ!
3. Select the software component you want to remove.
4. Click the “Change/Remove” button. All of the selected
component's files and settings are deleted from your
computer.
Repeat this process as necessary to remove other BlueFRITZ!
USB software components.
This completes uninstallation of the selected component.
6.2 Removing Software Components in
Windows Me and 98 SE
Proceed as follows to remove the BlueFRITZ! USB driver soft-
ware and FRITZ!web communications software in
Windows Me and 98:
1. Select “Start / Settings / Control Panel”, then double-
click the “System” icon. The “System Properties” win-
dow appears.
2. Click on the “Device Manager” settings page.
3. To remove BlueFRITZ! USB, select the entry “BlueFRITZ!
USB (Win98/Me)” under “AVM ISDN-Controllers”, and
click “Uninstall”.
To remove FRITZ!web, select the entry “FRITZ!web” un-
der “Network Adapters”, and click “Uninstall”.
4. When you are prompted to confirm the action, click
“OK”.
This completes the removal of the BlueFRITZ! USB and
FRITZ!web software.
BlueFRITZ!USB-e.book Seite 49 Montag, 18. September 2006 3:36 15