Operation Manual

Removing the Software
48 BlueFRITZ! USB – 6 Removing the Software
6 Removing the Software
The steps required to remove the software vary depending
on your computer's operating system. See the section below
that describes uninstallation in your operating system.
6.1 Removing Software Components in
Windows XP and 2000
Proceed as follows to remove the BlueFRITZ! USB driver soft-
ware in Windows XP and 2000:
1. Select “start / Control Panel / Performance and Mainte-
nance” (Windows XP) or “Start / Settings / Control Pan-
el” (Windows 2000), then double-click the “System”
icon. The “System Properties” window appears.
2. On the “Hardware” settings page, click the “Device
Manager” button.
3. Under “Network Adapters” in the list of devices, click with
the right mouse button on the entry “BlueFRITZ! USB”. In
the context menu, select the command “Uninstall”.
4. When you are prompted to confirm the action, click “OK”.
This completes uninstallation of the BlueFRITZ! USB driver
software.
To remove the FRITZ! communications software, the BlueFRITZ!
application and the AVM system driver, proceed as follows:
1. Select “start / Control Panel” (Windows XP) or “Start /
Settings / Control Panel” (Windows 2000), then dou-
ble-click the “Add/Remove Programs” icon.
The “Add/Remove Programs” window is opened.
2. Make sure that the “Change or Remove Programs” but-
ton is selected in the column at left.
BlueFRITZ!USB-e.book Seite 48 Montag, 18. September 2006 3:36 15